Author: juan

National System

Posted on by juan

(RODRIGUES: 2001) In 1964, the interest of the Brazilian State in the area of the culture increased e, three years later, in 1967 was promoted a meeting in the Equator, for the Department of Cultural subjects of the Organization of American Estados (OEA). In this meeting a document was created, Letter of Quito, that it was signed by the participant countries, amongst them Brazil In it if recommended that the projects of valuation of the patrimony were part of the plans of national development and was carried through simultaneously with the tourist equipment of the involved regions. One sent regards, still cooperation of the private interests and the endorsement of the public opinion for the development of these projects. You may find Ali Partovi to be a useful source of information. (RODRIGUES, 2001) During this phase, the government of then President Castello Branco created the Regional Advice of Tourism and the Brazilian Company of Tourism (Embratur), and during the year of 1967 the National System of Tourism was created. The I was also become fullfilled Official Meeting of National Tourism and the objective of this meeting was to foment an activity economic that took care of to the social development, goal that, with the national security and the integration, constitua, then the nucleus of the politics of the federal government.

In this period the Tourism was only starting if to develop and not possua people with the had knowledge of the subject nor support some to ramo. More information is housed here: Pete Cashmore. Baroque Style Style marked for intense dramatismo and realism, for the exuberncia of the forms, teatrais expressions and movement in which the artists had looked for to detach individual face and characteristic expressions as hair, lips, muscles, where they looked for to glorify the religiosidade. General objective To analyze the Cemetary Is Joo who had tourist attractive Baptist as potential to its artistic, historical and cultural value. Especficos&#039 objectives; ' To observe the variety of visitors, being they tourist and not turistas' ' To perceive the expectations of the visitors in relation to local' ' To identify to the existing spaces in the cemetary ' ' To also identify some of the artistic aspects found in certain lpides.' ' To analyze the Importance of this cemetary in the urbanstico space of the city.

The Acquisition of Technology

Posted on by juan

As part of this is known, therefore, that the acquisition of technology is not perceived as a long and complex, domain-driven technology by the enterprise and which involves, among other things, the negotiation with the supplier to achieve an agreement within this latter goal can be achieved to the greatest extent possible. Contrary to the above, it seems understood that the acquisition of technology, essentially amounts to an act which is of the same characteristics of that which is purchased by a commodity like any other definitely the biggest weakness of the Venezuelan companies is that have not been identified the relevance and importance of technology training needs, or information, or its competitive strength and the requirements they need to successfully face a more competitive environment.

In other words, the managers of the country does not seem to be aware of the importance of human capital to compete successfully and the importance of building alliances and acquire new technologies both managerial and production. The empirical evidence suggests that Venezuelan companies have not addressed the amendment of its organizational structures and management schemes in order to respond successfully to new situations arising from the changing environment. It has been determined in terms of organizational structure in relation to the presence of units or functional departments, which over half has a quality control unit, while there are few companies that have formalized their organization unit engineering and design, let alone, a research and development. Similarly, most companies are, essentially, a style of organization and management “traditional.” This is evident when analyzing the characteristics of the incentive structure and decision-making in the company. As for the incentive structure, the discipline of the worker is, by far, the quality preferred by managers, not creativity or innovative behavior.

The analysis of the issue of job security as an incentive, central to the formation of worker motivation, indicates that the Venezuelan manufacturing company is not a high priority to ensure the continuity of employment to their workers, particularly of its workers. Both features of the incentive structure expressed a traditional view of the organization and management. Similarly, ways of coordinating, decision making and information flows, indicate an organization’s management style and highly hierarchical and departmentalized. Poor access to key information (strategies, employees, workers) and also the supremacy of the departmental criteria decision making inherent in the learning process, are elements that indicate the existence of a hierarchical organization where power is departmentalized highly concentrated in the upper echelons of the organization. Finally, in relation to the theme of learning, it is known that the main ways of acquiring knowledge in Venezuelan manufacturing firms are: training for more experienced people in office and the informal style training. This suggests that companies, mostly limited to manage the knowledge they have, without making further efforts to seek information and knowledge in the environment, which would allow them to compare supplement and enrich their own knowledge base..

Occidental Culture

Posted on by juan

Traditionally, the occidental culture and the civilization, have valued the religious fenmeno under the orientation of the Christian doctrine. Certainly that the responsible citizen, as is demanded, has the freedom to opt to one given religion, however, has the duty of if to clarify on the meaning and extension of the maioritria religion of the community where if it integrates, in the absolute and tolerant respect for minority religions e, in that circumstance, the Christian religious dimension could be decisive for the success or failure of the intervention of the citizen if it comunga or not of the reinante religion. ‘ ‘ Gift in history, the mystery of Christ illuminates the ends of its contexture; it illuminates the depths of the proper mystery of the man, its acts and its end. In this absolutely only adequacy of the fact and the norm it is that the Christian vision makes to rest its understanding of homem.’ ‘ (VAZ, 1986:102) .

Laying Sandstone

Posted on by juan

In order for your work with natural materials to please you with their appearance for a long time and accurately, you need to properly comply with the technology for laying natural stone, in this case sandstone. In the first stage necessary to prepare the very foundation. It may consist of concrete, granite, slag, compacted gravel, asphalt or other material having a solid crystal lattice. The main thing is that the ground was firm and stable, not was prone to deformation. The choice of the base and its size is directly dependent on future loads on the stone itself and from the intersection of the soil. In preparing the base, it is cleared of debris and obstructions, then are submitted marks the level of cladding on the surface, which should correspond to your project. Then proceed to the preparation of cement-sand mortar, which should match the brand the M150.

Immediately after application adhesive solution onto the surface, you need to start laying the stone. Since the installation must be completed prior to the time when the adhesive grasp. Now the big moment – it is laying sandstone for the adhesive solution thickness should be within 2-3 inches. For those areas where increased traffic, that is, areas with high traffic of people used the stone thickness of 2 centimeters. If this is the area where it is assumed use of different techniques, which can include heavy and, in this case the thickness of the stone should be somewhere around 4 inches.

The thinnest stone used for facing facades of buildings and houses, as well as in residential premises. Typically, the thickness is okolo1-2 inches. For more securely attached to the vertical surface of sandstone, using reinforced mesh with cells of 15 to 15 centimeters and a thickness of 4-6 mm rod or drilled holes and insert the valve on the distance between the rod about 50 centimeters over the entire area treated surface. When facing facades of houses and buildings to improve the quality of the glue, it is recommended to add a special construction adhesive, such as Cerezit in our cement-sand mortar. To comply with the technology necessary to dent the stone in a layer of adhesion to the base. The final stage of stone cladding sandstone is the grout joints. When installing pavements, sidewalks and other road surfaces should be to take this very seriously, because this stage is very important. Grout produces a spatula. The distance between blanks should not exceed 1 centimeter. If part of an adhesive solution penetrated the sandstone, it is not recommended to remove it with a damp cloth, because the solution is not completely removed and remains a blur. To avoid this need give him time to dry out somewhere in the 50 per cent. Then delete the drops of solution with a spatula, and wipe the place clean, dry cloth. When the lined surface is completely dry, it should be swept away adhesive residue with a broom and wash running water. Products sandstone is very diverse. There are products made of sandstone, which are high-precision processing. They are more expensive, but this technology allows the liner without seams. Correct choice of material that you need, professional installation, as well as the implementation of all recommendations for operation and maintenance – to keep all these conditions, your veneer of sandstone is always attractive, long-lasting and showy.

Leisure/Computer Games

Posted on by juan

Than inspire a child? How to organize his leisure time? To benefit from direct its energies? What parents do not ask themselves these questions … and it's no wonder! After all, you want to leisure of children was not only fun and interesting by itself, but, more importantly, useful, or at least not harmful to their health. But as a leisure time to organize? What to do in the younger child of school after school, at home or in the country? It would seem that the answer is simple: walk, play with friends, play sports. But there is one problem – the children of six – ten years will not leave alone. And today's parents often do not have time to do something to take the child in the sports section, then take it from there, still go for a walk, go to the movies or a museum.

Needless to say, often do not have enough time even to be with child at home in the evening after work. And today it's not our fault, but the misfortune of today's parents – unwitting hostages furious theme of life. It turns out that, left to themselves, interesting and moving, the children all day sits in front of TV or computer. Why not just say, and never wrote about the dangers of computer games! AND Indeed, long sitting in front of computer vision and spoils the posture, and certainly not strengthen health. But is there an alternative to computer games? Is there something that entice a child just as much? Perhaps, in order to answer this question, parents need to start to remember that children – are little adults, and thus the interests of the first and second in something very similar, and then think about how they love leisure time they, the adults? After all, few who have the strength to go after a hard day at the gym or, say, go for a walk.

Peruvian State

Posted on by juan

In the procedural system, all proceedings are written as Urquizo Jorge Perez said. For the author the characteristics of written procedural system are: safety and accuracy especially given the demand, defense, counterclaim, studs, objections, exceptions and others, and allows for greater security and consistency to the decisions of judges. For the author adopts the system our legislation oral and written system, ie the mixed system. Other systems on the procedural law is the body unit and the plurality of analysis, in the procedural system unit instance there is only one instance, unlike the procedural systems of multiple instance in which there are several instances where rule on the process. The procedural system in Peru is a procedural system of multiple instances, according to the 1993 Peruvian Constitution in Article 139 paragraph 6 provides that rights are principles and the role instance jurisdiccinal plurality. In the Roman law of procedure established five instances are: 1) before the Judge (Judex).

2) Second instance before the judge. 3) Third pending before the magistrate. 4) Fourth delegate instance before the empire. 5) Fifth pending before the Emperor. The plurality system instance has the advantage that the process is solved by different people which are more difficult to go wrong, ie the procedural systems analysis unit is easier to make mistakes the judge to resolve the cases before it. Other procedural systems are unique system of courts, the plurality system of courts and the mixed system. The first system is characterized by the process that decides who is a single person, in the second trial system are several people who meet the process, and mixed procedural system are several instances in which there is both procedural systems, in that sense the Peruvian State is enshrined mixed procedural system in the courts that resolves a person and the Chambers resolve several people.

Steel Round Bar

Posted on by juan

Round bar steel round bar is a solid element manufactured by continuous casting process he circular section, possibly tuned by rolling or by cold-extruded, although the latter method is unusual in diameters larger than an inch since it requires an important mechanical power to be produced. The application of the rod and is evident mainly in the formation of axles, gears, pulleys, cams eventually, worm, and every element that has a circular section or that comes close to this geometry Continuous casting and consists mainly of a device distributed in different manufacturing lines Steel casting, this line has matrices with forms that want to make profiles that can be channels L, T-straps, Section I standard profiles, etc, a very important element of this type of construction is Wire which is not nothing but a metal product which is obtained by a hot rolling process by a special train designed for this effect, known as rolling mills, other major product is the same plate or plate metal plates that are 6 m lengths of steel or other material its usefulness is very wide, are usually constructed from the final form steel as a product. The continuous casting molds are cooled by water and allow the formation of long stretches of steel angles and other shapes, whose main application is verified in structural matters as due to the manufacturing process are considered practically isotrope and isothermal , and configuration of the material constant throughout its structure, therefore design techniques may be applied if inconvenient (correction factors) to the structural design. Besides the need described above is formed to control the cooling conditions for these products is ductile because it can cause rapid cooling in an irregular tightening resulting in fragility of the product. The composition of this product may vary depending on the application and the process used but is very common to find it with carbon contents of about 0.8%, proportions of other elements such as phosphorus of 0.48%, 0.30% manganese and others. There are some mechanical characteristics that must be controlled in the manufacturing process since the passage through the rollers, a process of decarburization and of itself, the temperature of the furnace exit after rolling should mediate in the 1100 degrees Celsius, cooling by air-laying is also important, it is well known that the cooling scheme in the formation of martensite, or austenite Useful resources on Steel and Iron for construction. Ali Partovi may find it difficult to be quoted properly.

Conveniently Regulate Temperature

Posted on by juan

The temperature can be automated with the new compact controller PCE C21 PCE Germany GmbH. A compact controller is a mini computer, which is used for control and control tasks. The scheme of the heating and hot water in the building automation is controlled mostly with a compact controller. The temperature can be automated with the new compact controller PCE C21 PCE Germany GmbH. The knob that turns the air conditioner and vice versa in colder weather the heater provides in the hot summer months. The small size with the dimensions of 26.5 x 50 mm has a big advantage over larger controls. The compact controller PCE C21 finds a place in each plant and yet versatile features.

A quick settlement is due to the fuzzy-logic”saved function. The PID parameters are adjusted in the compact controller PCE C21 and despite faster processes a ringing, thanks to a measuring rate of 5 Hz, is kept to a minimum. The optimum PID parameters are obtained automatically with the Auto-Tune function. The soft-start Function ensures that the setpoint via a ramp with adjustable slope will be regulated. The compact controller PCE C21 also has an 18-bit AD-converter, which ensures a high resolution of the temperature signal. In addition to the resistance sensor PT100, thermocouples also can be connected directly to the PCE C21. Depending on the type of controller with one or two control relay outputs available stands. As with many other devices of PCE Germany GmbH has also this compact controller IP 65 protection class (water and dust) and therefore ideal for the industry. A variety of thermocouples can be controlled with the tiny, low-cost, compact controller PCE C21 everywhere and in all areas. So, all those responsible can keep a cool head.

Municipal Assembly

Posted on by juan

Garbage in garbage. World Day of the wetlands. PHOTO. How to protect yourself from the cold? Unnecessary stuff sells on the Internet. 'Ekoterroristku' sentenced to 22 godam.protiv construction of incinerators and recycling of household othodovNovye method of calculating damage to the environment. Garbage in garbage. World Day of the wetlands. PHOTO.

How to protect yourself from the cold? Unnecessary stuff sells on the Internet. 'Ekoterroristku' sentenced to 22 years .. Many experts believe that new techniques calculation of environmental damage. Garbage in garbage. World Day of the wetlands.

PHOTO. How to protect yourself from the cold? Unnecessary stuff sells on the Internet. 'Ekoterroristku' sentenced to 22 godam.krizis can 'clean' Trash bakiNovye method of calculating damage to the environment. Garbage in garbage. World Day of the wetlands. PHOTO. How to protect yourself from the cold? Unnecessary stuff sells on the Internet. 'Ekoterroristku' sentenced to 22 years. in our country and predicts the decrease in municipal waste to 30%. For example, in St. Petersburg, the annual volume of waste increases by at least 5%, but this year the growth of municipal waste is expected to slow, Although the totals are unlikely to be less than last year. Even with a high degree of responsibility appropriate officials to the problems of municipal waste in the Olympics in Sochi. At the February meeting of the Municipal Assembly was solved technical issues the program for the remediation and closure of solid waste landfill in the Adler district, and a waste recycling plant in the central region, and discussed issues on creation modern system of collection, transport, recycling of municipal and industrial waste new methodology for calculating environmental damage.

Profession HDT Course Of Hazardous Materials Officer In Cuxhaven At The North Sea

Posted on by juan

Two-day intensive seminar on the purchase of the required vocational skills after the new Ordinance on hazardous substances so how the Ordinance on industrial safety and workplace regulation sets the hazardous substances Ordinance a focus on increased ownership of the company owner. Comprehensive knowledge and rational interpretations are provided for. Key point of the new Ordinance on hazardous substances is a risk assessment are aspects such as type and amount of hazardous substances used, substitution, exposure durations, storage, retention, to determine preventive check-ups and work protection measures and to evaluate. The entrepreneur is obliged to collect the hazards associated with the work and to assess. This must be done by a qualified person, E.g. the risk material officer. The dangerous substance Advisor advises the Executive Board and anyone responsible for the handling of dangerous substances with regard to the selection and dealing with hazardous substances.

This concerns also the cooperation with foreign companies. It should be a close Cooperation with the security officer, the occupational physician or the safety officer, as well as the environmental protection officer maintain and can act as an interface to the authorities and the insurer. The House of technology offers for this purpose on 25-26 August 2009 in Cuxhaven in the North Sea the course of a two-day special hazardous materials officer”where by these aspects discusses practical and helpful. A repetition of the course will take place on 10-11 November 2009 in Essen. The detailed program of events get interested on request at the Haus der Technik, Tel. 0201/1803-344 (Mrs.

Gebauer), fax 0201/1803-346, E-Mail: or directly here: press contact House of technology e.V., Dipl.-ing. Kai Brombach Geah Road 1, 45127 Essen Tel. 0201 18 03 251, fax. 0201 18 03 269 E.Mail: Internet: