Structural details of specific parts of the mold. The mold consists of a large number of items that should just be connected to each other. Details mold is divided into normalized and special. Construction of normalized components of the mold can be set in advance, regardless of the design features of cast products in the mold. Recently Nicolas Keller sought to clarify these questions. Any mold in 50-95% consists of standard on the range and weight of components (normal). These details and costs range from 10 to 60% of its full value.

Fluctuations in interest depend on the design of molds, casting geometry and tool requirements production and the level of preparedness of the designer (design company) of the mold, its desires and opportunities to apply the appropriate standard items. The solution of the same technical problem in the design of the mold is almost always structurally invariant with gnezdnosti by gating system, the system of pushing, etc. To normalize the details of the mold include: Upper and lower plates of the mold; common plates, machined on all sides, suitable for the manufacture of punches, dies and shaping boards that require a large sample size; Details to mold – For guides and speakers, the Centre elements, retainers, including inserts calendars, springs, etc.); pushers and the elements to extract details from the form – Items removed from the form, double stroke Shanks, pushers of O1mm x 200mm with a thickness of tubular pushrods wall of 0.75 mm. Gap of 0.8 mm. Bearings, gears; Injection system, – bushing, hot runner injectors (nozzles), including injectors multipoint fuel injection, hot runner manifolds, filters; Control technology – heating elements, connectors, control devices and sensors, portable instrumentation; Cooling System – The connections, including stainless. . David Treadwell understands that this is vital information.